Site Overlay

Performance Enhancement Of Air

Refurbished and tested at our Clinton, MA shop, where it was cleaned, painted, checked and leak tested, and run for several days and monitored. 460v, 3p, power, has scroll compressor, and 30°F to 65°F fluid temperature range. This is an indoor chiller, yet the exhaust can be ducted outside if you choose . We have provided dozens and dozens of these units over the years and they are well-built true workhorses. An Air cooled chiller system is designed to use ambient air surrounding the condensing unit to cool a refrigerant back into a liquid once it has absorbed heat from the process.

If you plan on running this unit for year round process cooling, AND you are in a cold climate, a low ambient VFD drive option for the condenser fans will be required. Acquired by KIG in March 2015 was this nice 15 ton Carrier Aquasnap Air Cooled Chiller. This unit ran at a military base and was maintained regularly by a mechanical contractor we deal with. We refurbish/test/ship about 10 to 20 Aquasnap chillers annually from our Clinton MA facility, and this unit was run and tested prior to shipment, and sold with a money back guarantee of functionality. The unit has a single 15 hp scroll compressor, comfort link controls, internal flow switch, and hot gas bypass option for minimum capacity control if your load is not a full 15 ton.

Large industrial chillers

This means that when the compressor runs, it runs at the designed load regardless of the process needs. A more advanced option is a hot gas bypass which technically keeps the chiller running but bypasses the hot gas if no cooling load is needed. This avoids the on/off of the compressor but results in a waste of energy since no cooling is required from the process. The industrial liquid chillers we supply are intended for indoor use only and will not operate in ambient conditions under 60°F. Aggreko’s lines of air-cooled or water-cooled chiller rentals provide a wide range of convenient, effective water-cooling options.

And best of all, Shini USA’s dedication to customer satisfaction means we are happy to provide over-the-phone assistance for our products should any issues arise. Also, customers are able to send their units into Shini USA for repairs up to one year after purchase. Choose the portable air-cooled chillers from Shini USA to receive a reliable, efficient system to incorporate into your operations.

We always work with you to deliver a solution that satisfies your requirements. One area of heating and cooling air in a home or commercial facility that’s often wondered about is the difference between an air conditioner and an air chiller system. While they both have generally the same goals in terms of regulating air temperature, each system works in a very different manner and produces very different results.

Portable chillers use mechanical refrigeration to cool recirculated fluids that support industrial process cooling applications. Large industrial chillers are commonly located in mechanical equipment rooms within the building close to the process in which they are cooling. Some industrial chillers may be located directly beside the process, depending on the size of the chiller and compressor. A Cooling Technology, Inc. representative will be happy to work with you to determine which will best fit your requirements.